|
Bloody EML
|
|
04-14-2018, 12:59 PM
(This post was last modified: 04-14-2018 01:01 PM by Dave W.)
Post: #2
|
|||
|
|||
|
RE: Bloody EML
If you are having problems with starting when the engine is cold, verify you have fuel pressure. [ fuel pressure should not bleed down ] The cold start temp sensor is the large brown one. Verify that you have current going to the cold start injector plug. Then verify current is getting to the sensor. Next ground out the sensor plug. If the engine does not start you probably need a new injector, if it does start then you should replace the temp sensor. Note both injector and sensor are $$$$. Dave W
|
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Bloody EML - kazi - 04-13-2018, 11:20 PM
RE: Bloody EML - Dave W - 04-14-2018 12:59 PM
RE: Bloody EML - kazi - 04-15-2018, 08:54 PM
RE: Bloody EML - jondee86 - 04-15-2018, 11:29 PM
RE: Bloody EML - kazi - 04-21-2018, 11:00 PM
|
User(s) browsing this thread: 1 Guest(s)