HKS 260 8.0 Cam Card

[Project D]

(02-14-2018 12:02 PM)d3nso Wrote:  Any recomendations regarding setting them up?

The same way as any 4AG cams.
I mean the cam card is useful for knowing the specification, but it doesn't change anything else.
install them in your engine, set the valve clearance to IN: 0.20mm / EX: 0.25mm (like 99% off cams on this engine) and that's it.

If you have adjustable cam pulley you can set your intake to something between 5/10° BTDC @1mm (max lift ~106/108° ATDC) and your exhaust between 0/5° ATDC @1mm (max lift ~110° BTDC) to get a baseline.
With this cam duration the exhaust timing should not have a huge impact on performances, on the other end the intake timing can have a significant impact in mid-range.