20V shim micrometer

[oldeskewltoy]

(12-21-2017 11:33 AM)Project D Wrote:  Personally to mesure shim I use (something like) this:

When you have a lot of them to measure, it goes way faster than with a micrometer.

very nice..... but currently outside my budget... I don't do enough 20V's YET.......


as to a tray, or sorting for the 20V shims... I'm kinda in/at a dilemma point right now... not enough spare shims to actually begin a kit yet.....




This is my 16V kit... and as you can see, due to machining tolerances... I have 16V shims down to a thousandth... there are about 500 shims in this kit. For these I use a dial caliper that measures in thousandths