Assembling a LEEN J160
06-26-2017, 04:59 PM
Post: #11
RE: Assembling a LEEN J160
(06-26-2017 03:43 PM)mad.matt Wrote:  
(10-29-2011 09:12 PM)oldeskewltoy Wrote:  Joe Leen.

(Click on Above)
I couldn't resist!

Is this J160 also the same box that goes in the S2000?

Would be good to know for the future in case I sh*t a box and can just swap the bell housing over from a cheaper car.

S2000 boxes hold their money, at the moment, IS200 boxes don't!

from everything I've seen... they are NOT the same gearbox (although Wiki says they are)

[Image: AEU86 AE86 - RE: Assembling a LEEN J160]

The top photo shows the S2000 transmission - note the substantial differences in the external cases compared to the 3 known versions below... Altezza, Miata, S15. Note how the 3 lower versions have the same, or very similar egg crate center section - which is lacking in the S2000 version, while the S2000 transmission has the linkage going through a tube verses internally in the other 3.....

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user


Messages In This Thread
Assembling a LEEN J160 - oldeskewltoy - 10-29-2011, 09:12 PM
RE: Assembling a LEEN J160 - DJexor - 06-12-2017, 03:53 PM
RE: Assembling a LEEN J160 - oldeskewltoy - 06-12-2017, 05:35 PM
RE: Assembling a LEEN J160 - DJexor - 06-12-2017, 06:55 PM
RE: Assembling a LEEN J160 - mad.matt - 06-26-2017, 03:43 PM
RE: Assembling a LEEN J160 - oldeskewltoy - 06-26-2017 04:59 PM
RE: Assembling a LEEN J160 - mad.matt - 06-27-2017, 11:11 AM
[] - oldeskewltoy - 10-29-2011, 09:15 PM
[] - Eric - 10-29-2011, 10:08 PM
[] - Ivan141 - 10-29-2011, 11:11 PM
[] - Eric - 10-30-2011, 09:17 AM
[] - oldeskewltoy - 11-04-2011, 06:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication