|
20v mains & big end bearing
|
|
12-22-2016, 01:23 PM
Post: #3
|
|||
|
|||
|
RE: 20v mains & big end bearing
izanagi, like ditn said.... Don't go for the numbers. They're OK for reference but measure carefully each one.
You have two options here. If your engine is still STD you can buy some King Bearings std ones, and by wear they will match the measurements. OR If your engine is still STD you can go for the numbers (with measurement taken carefully) regards |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
20v mains & big end bearing - izanagi - 12-22-2016, 12:50 AM
RE: 20v mains & big end bearing - ditn - 12-22-2016, 08:45 AM
RE: 20v mains & big end bearing - pack - 12-22-2016 01:23 PM
RE: 20v mains & big end bearing - izanagi - 12-22-2016, 03:42 PM
RE: 20v mains & big end bearing - pack - 12-22-2016, 05:00 PM
RE: 20v mains & big end bearing - izanagi - 12-22-2016, 10:49 PM
RE: 20v mains & big end bearing - pack - 12-23-2016, 11:40 AM
RE: 20v mains & big end bearing - oldeskewltoy - 12-24-2016, 11:26 PM
RE: 20v mains & big end bearing - ZDoman - 12-25-2016, 11:38 AM
RE: 20v mains & big end bearing - pack - 12-26-2016, 12:42 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 4AGE Big port head failure | Blaze0010 | 3 | 372 |
01-23-2026 03:35 PM Last Post: totta Crolla |
|
| Big wheel problems | gh0st | 16 | 12,889 |
11-15-2021 10:51 PM Last Post: gh0st |
|
| Front big brake kit | DidiDex | 14 | 22,305 |
10-24-2016 09:29 AM Last Post: FanIsHere |
|
| Wheel Bearing Temperature | Super86 | 5 | 8,458 |
09-29-2014 12:26 AM Last Post: jondee86 |
|
| Machining Pistons to run 20v head... And FCR's on a 20v? | PazzaAE86 | 2 | 6,335 |
09-15-2013 01:08 AM Last Post: jondee86 |
|
User(s) browsing this thread: 1 Guest(s)