AE86 GTV-Multipoint Cage, Beams, AP Brakes & Brides

[Conrad]

(11-22-2015 02:11 AM)Celica RA45 Wrote:  hi conrad my car is finished

Looking good mate

---

---

So we had a hole in the fire wall where the welded strut brace was cut out ( to allow the airbox to be fitted )



So I made a template out of cardboard and then transferred that onto the plate.




And voila... One metal template with the hole to access the wiper arm linkage



Clean the hole up ready to weld

---

So I took the car up to Matt who kindly offered to tack it in place for me



And welded in...



So before it can be filled, primed and painted it needed grinding flat.


So after plenty of grinding, flatting, priming and painting. I drilled and tapped the holes and fitted the OEM style inspection cover.

Another job off the list.... Standard looking



However, my filling and painting skills are not the best so I am not exactly happy with the finish but the car is going for the paintwork touching up at a later date due to damage that occurred at Zen so I will add this bit to the list to get fettled :lol: