Diff bearings
06-22-2014, 02:00 PM
Post: #8
RE: Diff bearings
could be, quite hard to hear via the internetSmile.

My rear wheel bearing were worn out and they made more of a very soft rumble noise before they were replaced.Were the still rolling smoothly when the axles were disassembled?

It can be quite difficult to point out where a whine is coming from.There are quite some bearings in the driveline (gearbox, propshaft, wheels, diff).

You will have to start excluding possibilities by testing.Is the whine speed realted?is it gear related?if you slalom left to right, does it get worse (putting side pressure on wheel bearings)?is it getting worse under load(accel/decel)?

Maybe you can jack up the rear axle and put the car in a gear and let it roll so you can listen around the moving parts, be very carefull though...

good luck!

Real men race downhill
Find all posts by this user


Messages In This Thread
Diff bearings - izanagi - 05-29-2014, 09:38 PM
RE: Diff bearings - fax0815 - 05-29-2014, 11:36 PM
RE: Diff bearings - izanagi - 05-30-2014, 12:01 AM
RE: Diff bearings - jondee86 - 05-30-2014, 12:03 AM
RE: Diff bearings - izanagi - 05-30-2014, 12:19 AM
RE: Diff bearings - totta Crolla - 05-30-2014, 10:54 AM
Re: Diff bearings - izanagi - 06-22-2014, 01:35 PM
RE: Diff bearings - wouter86 - 06-22-2014 02:00 PM
Re: Diff bearings - izanagi - 06-23-2014, 06:43 AM
Re: RE: Diff bearings - Bean - 06-23-2014, 07:34 AM
Re: Diff bearings - izanagi - 06-23-2014, 12:44 PM
RE: Diff bearings - assassin10000 - 07-05-2014, 07:29 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Question on Rod Bearings mister86 3 4,764 03-19-2020 03:46 AM
Last Post: oldeskewltoy
  Emergency help find store with bearings france Allexz 5 5,653 09-12-2019 03:24 PM
Last Post: Allexz
  Top mount bearings totta Crolla 1 4,132 01-22-2014 11:33 AM
Last Post: totta Crolla
  Which new bearings for ae101 4AGZE crankshaft&connecting ditn 4 7,909 10-31-2013 06:04 PM
Last Post: ditn
  Diff bearings Hachi-man 4 6,081 11-14-2012 07:04 PM
Last Post: McKenney

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication