Bean Bandits Levin 'Globetrotter'

[Bean]

(04-29-2014 09:52 PM)zenki Wrote:  I think i saw on driftworks that BC BR version has 4,5 for the rear. Or do they not sell these anymore?

I've been following this thread and doing abit of research for my own. I must admit making a decent suspension setup is more difficult than i thought.

They do now but only recently I guess, when I asked BC directly a few months ago the could only supply me with 6kg rears.

The biggest problem with suspension setups is that there's no one fits all solution. Everybody has his own preferences and level of comfort, let alone modifcations to the car.

For example, I will seem/stich weld my entire chassis (very long exhausting process) to run the 6/4.5kg setup as I think the chassis too soft. To put this in perspective, I managed to put a slight stress dent into my roof just behind the soonroof and b-pillar with my previous setup (HTS long stroke and stock spring, dampers on almost full stiff due to the stock springs) because I attacked one of the higher curbs on the Nurburgring a bit too agressive.

Like mentioned before I like the response I got from Stance. Unlike others the didn't simply say we can do what ever you want but actually reasoned their replys with graphs and explanations.

HSD actually also offer a 3way setup but not of the shelf for the AE86 and I wasn't able to get any answers if it would be possible, despite contacting a few distributors.