engine start up and retractor light

[jondee86]

Unfortunately, there is no easy way of solving these problems. You have
to sit down with the wiring diagram and try and identify and trace every
single wire. Then when you know what should be happening, you can
start from the control switch and work your way towards the lights, looking
for something that does not do what it is supposed to do.

Wires that are broken or connect to nothing. Spare plugs, bad joins, short
circuits, blown fuses or relays that have worn out contacts. The Levin
lighting controls are straight forward compared to the Trueno with pop-up
lights. Good luck with finding the problem.

Cheers... jondee86