cams cams cams
|
08-29-2013, 01:31 PM
Post: #1
|
|||
|
|||
cams cams cams
Hi Guys,
Yes its another cam discussion ![]() I have a stock 4AGE with a slightly skimmed head running Mikuni PHH44 carbs and Janspeed 4-1 manifold with full Janspeed exhaust system. Shes being used as a weekend car so not a daily drive, so i could stand to loose a little low end torque/power. I've been looking at the following: - Kent cams, 282 Deg Inlet/Exhaust http://www.kentcams.com/product-details/...mpetition/ - Piper cams, 288 Deg Inlet/Exhaust http://www.pipercams.co.uk/pipercams/www...OY16VBP285 - Cat cams, 282 Deg Inlet/275 Exhaust http://www.catcams.co.uk/acatalog/7105140.pdf My 86 was dyno'ed at 127HP and my goal is about 140HP, nothing too crazy, don't wanna spoil the balance. If anyone knows which would be best or any alternatives then all info is appreciated ![]() ![]() |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
cams cams cams - megabob - 08-29-2013 01:31 PM
[] - Alex170984 - 08-30-2013, 04:53 PM
[] - oldeskewltoy - 08-30-2013, 08:53 PM
[] - oldeskewltoy - 09-04-2013, 09:17 PM
[] - totta Crolla - 09-04-2013, 09:25 PM
[] - totta Crolla - 09-04-2013, 10:31 PM
[] - oldeskewltoy - 09-04-2013, 11:53 PM
[] - totta Crolla - 09-05-2013, 12:48 AM
[] - Alex170984 - 09-12-2013, 02:49 PM
[] - Alex170984 - 09-12-2013, 02:51 PM
[] - Alex170984 - 09-13-2013, 02:56 PM
[] - oldeskewltoy - 09-13-2013, 07:30 PM
[] - oldeskewltoy - 09-20-2013, 07:44 PM
[] - totta Crolla - 09-20-2013, 11:44 PM
[] - Alex170984 - 09-23-2013, 03:11 PM
[] - totta Crolla - 09-24-2013, 10:44 PM
[] - Alex170984 - 10-24-2013, 01:17 PM
[] - Alex170984 - 10-24-2013, 04:47 PM
[] - oldeskewltoy - 10-24-2013, 10:46 PM
|
User(s) browsing this thread: 1 Guest(s)