4age build help

[Ivan141]

Use clamps to keep the fuel lines in place.
Run them either inside or underneath the car. If you do choose to keep it under the car, mount the fuel pump there as well. In any case: a proper mount for the pump would be a very good idea.
Where your fuellines (or any line/cable for that matter) go through the bodywork, use a rubber grommet to secure it so it cant grind against the metal (and a bit pointless in your cars case: keep stinky air out). A bit of aluminum foil just isnt the proper way to secure a fuel line.

The electrics dont look very dangerous to me, I've seen much worse. But usually if the guy who built the car is sloppy in one department, he will have been in many others as well. My only advice here is to tie those electric lines around the driver side footwell together and make sure they cant get cought up with your feet or the pedals (trust me on this one).

Did this car get swapped to a 16v for sales purposes? Seems unlikely a dorifto'd up 86 like this would be rocking a standard 16v engine...