My 86 dynoed 148 hp on wednesday 10 2013

[makkuro]

hello,

I have just dynoed my car to see how was my rebuilt and to set the timing of my camshaft.

That might interest someone.

the set up is: i paste my thread from 4AGE results

makkuro Wrote:

makkuro Wrote:What cam timing will you recommend formy set up?

264° hks in and ex
martelieus header 4-2-1 and complete muffler
trd head gasket 0.8mm, shave 0.5 mm
toda adjustable cams
brand new oil pump
seals (segments et tous les joint, not sure in english)

My 86 is a zenky model

Thanks

Now i know what timing i will use.

but first i want to thank Project D who guided me all the way through ( choice of the cams, choice of the size of the gasket, choice of the muffler, how much to shave, how to break in the engine etc to get the number that i got.

He convinced me to keep my engine and upgrade it as it is now instead of doing a swap where i will spend way more because you never know how is the health of the engine, real mileage, change the wires.etc. you know what i mean.

thanks dude!

here is my number: 148hp on not ultimate condition

Also project d

Quote:If I can add few things up about makkuro's setup.
The engine head, apart from the parts mentioned earlier, is absolutely stock. (Not ported)
Also, he still use the stock ECU

1st: 148hp (135rwhp) @ 7327rpm and 158Nm (116.6ft-lbs) @ 5294rpm
2nd: 146.2hp (133rwhp) @ 6868rpm and 163.3Nm (120.5ft-lbs) @ 5308rpm
3rd: 147.4hp (134rwhp) @ 7059rpm and 162Nm (119.5ft-lbs) @ 5191rpm