Headlight issues
|
05-22-2013, 11:09 PM
Post: #6
|
|||
|
|||
Well, switch and handle delivers power to the headlight, the current passes through the short-pin next to the headlight relay then goes out the fusebox through aforementioned wires and to the low-beam coils.
No power getting to the high beam coils at all and I hear nor feel any relay clicking (But I do know the relays are functional, thats the weird thing) Lights are of normal Bosch H4 type and I have checked several times that no coils are burnt out. I don`t know which wire on the fusebox is for high-beam, and everyone says that when you use flash/high beam all the handle does is connect the earth to the headlight or something like that (Reversed earth connection or whatever they call it). Thats why I`m highly sceptical to the fact that right now, each of my head lights are ground right on chassis right next to the lights, on the fender bolts, rather than going all the way to the handle on the steering column, and there are no wires cut at the steering column switch assembly, there is however, as I mentioned, a black & orange wire that has been cut-off and taped underneath the fusebox in the engine bay. 1x AE86 84` Zenki Coupè Levin 4A-GE 20v 1x AE86 83' Zenki Coupe Levin 4A-GE 16v 1x TA60 82' Sedan 2T 8V 1x TA40 78` MK1 Zenk/Pre-Facelift Wagon 4A-GE 16v |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Headlight issues - Rascal21 - 05-21-2013, 03:41 AM
[] - Rascal21 - 05-22-2013 11:09 PM
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
STL file for the early spec Levin headlight ball joint plastic clip | DaLanZhu | 2 | 890 |
04-26-2025 03:24 PM Last Post: DaLanZhu |
|
Running issues | sam3007 | 6 | 3,807 |
06-26-2022 01:34 PM Last Post: Dave W |
|
AE86 Headlight + wiper wiring (levin) | bozu | 11 | 18,405 |
09-19-2017 02:06 PM Last Post: banpei |
|
Over heating issues | MIGGZFSU | 12 | 13,625 |
05-11-2017 05:09 PM Last Post: MIGGZFSU |
|
Trueno headlight help | kazi | 9 | 14,386 |
04-20-2017 09:37 AM Last Post: kazi |
User(s) browsing this thread: 1 Guest(s)