9.4:1 or 10:1 pistons?

Threaded Mode | Linear Mode

9.4:1 or 10:1 pistons?

05-16-2013, 03:25 AM

Post: #7

oldeskewltoy Offline

4AG Super Genius ;)

Posts: 1,838
Joined: Jan 2007
Reputation: 1

Re: 9.4:1 or 10:1 pistons?

thanos Wrote:Guys, i have a question about my pistons, i replaced my pistons when i rebuilt the engine, and the code was 13101-16030-02, but from what i red some people say that the 13103 only are the 10:1 and other say that the 16030 are 10:1 and 16010 and 16020 are the 9.4:1, which of them are the 10:1 pistons?

The old pistons had the tall center ,but unfortunatelly i didn't see the new ones before the installation so i have no clue...

Above is the oversize (81.5mm) 10 to 1 piston. 13103 = O/S, 13101 = std size

16030 = 10.0 to 1

Dan -

You can | Sad

.... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991

« Next Oldest | Next Newest »

Messages In This Thread

9.4:1 or 10:1 pistons? - thanos - 03-13-2013, 03:37 PM

[] - Project D - 03-13-2013, 03:48 PM

[] - thanos - 03-13-2013, 07:51 PM

[] - ga_goosh - 05-15-2013, 02:59 PM

[] - thanos - 05-15-2013, 03:42 PM

[] - Alex170984 - 05-15-2013, 04:52 PM

Re: 9.4:1 or 10:1 pistons? - oldeskewltoy - 05-16-2013 03:25 AM

[] - Ivan141 - 07-30-2013, 11:02 PM

[] - oldeskewltoy - 07-31-2013, 12:34 AM

[] - Alex170984 - 07-31-2013, 12:58 PM

[] - Ivan141 - 07-31-2013, 05:20 PM

[] - Ivan141 - 07-31-2013, 09:46 PM

[] - Alex170984 - 07-31-2013, 11:08 PM

[] - pack - 08-01-2013, 11:37 AM

[] - Ivan141 - 08-01-2013, 12:50 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	82mm Stock compression Pistons	apardal	4	4,098	11-24-2021 04:26 PM Last Post: apardal
	Small Port 10.3 Pistons	Alex170984	1	5,111	10-25-2016 09:18 PM Last Post: oldeskewltoy
	Machining Pistons to run 20v head... And FCR's on a 20v?	PazzaAE86	2	6,001	09-15-2013 01:08 AM Last Post: jondee86
	Wiseco Pistons and Oil Squirters	slacker.cam	1	3,900	05-15-2012 12:02 AM Last Post: slacker.cam
	Silver top pistons	panda_tureno86	1	3,440	01-30-2012 01:23 PM Last Post: panda_tureno86

User(s) browsing this thread: 1 Guest(s)