4AGE Heat Shielding Intake Gasket

Threaded Mode | Linear Mode

4AGE Heat Shielding Intake Gasket

03-31-2013, 11:02 AM

Post: #7

alimonos Offline

Posting Freak

Posts: 3,132
Joined: Jan 2005
Reputation: 0

jondee86 Wrote:I made my own out of 3.18 (1/8") virgin PTFE for an ITB onto 16V 4AGE
conversion. This fits between the head and the intake manifold.

Seems to work quite well. I can't measure the air temperature, but I can
say that after a drive, the intake manifold is only warm to touch. I also
know that the 20V Blacktop has a three layer insulating gasket between
the head and the intake manifold. It has a thin metal layer each side
with a thick (2mm?) layer of black plastic between.

Cheers... jondee86

could you make one for me too ? and how much would it cost ?

AE86 FANATIC!!!

« Next Oldest | Next Newest »

Messages In This Thread

4AGE Heat Shielding Intake Gasket - asyrigos - 03-29-2013, 09:29 PM

[] - robokill - 03-29-2013, 11:02 PM

[] - jondee86 - 03-29-2013, 11:25 PM

[] - asyrigos - 03-30-2013, 04:52 PM

[] - asyrigos - 03-30-2013, 04:59 PM

[] - jondee86 - 03-31-2013, 12:44 AM

[] - alimonos - 03-31-2013 11:02 AM

[] - asyrigos - 03-31-2013, 02:05 PM

[] - jondee86 - 03-31-2013, 11:05 PM

[] - oldeskewltoy - 04-01-2013, 12:19 AM

[] - asyrigos - 04-01-2013, 10:58 AM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	AE86 4age engine not starts crank ok backfires to air intake	Ryo	18	19,337	08-16-2018 01:36 AM Last Post: Bean
	valve tick on cylender two intake	dinkers542	31	31,712	12-15-2014 09:52 AM Last Post: Bean
	4age blue top from MR2 same intake manifold?	dinkers542	8	11,659	11-02-2014 05:24 PM Last Post: ditn
	Oil leak (maybe a cylinder head gasket?)	max_ae86	15	18,675	11-30-2013 03:59 AM Last Post: jondee86
	My new rebuilded denso starter (Heat soaked?)	Apsogos	8	8,694	10-01-2012 07:43 PM Last Post: Apsogos

User(s) browsing this thread: 1 Guest(s)