Sum_Fing_Wong's Project Levin

[Sum_fing_wong]

i tried using the pieces i cut out as a template but they were just to complicated so i just started cutting metal to the approximate size and shaping and shaving as needed.





first the inner panel tacked and shaped and welded !



then came the outter panel ... after some fitting trimming and reshaping with good old tin snips and hammer this is what i came up with.





and then i welded it in ! well mostly i left some areas for later, coz the part i made was made a bit bigger then i needed, so once i test fit everything i'll still have material that i can remove.



unfortunately once again i got to caught up in the work that i forgot to take pics ... before i cleaned up the welds



and then i coated it ... with some primer



and a quick skim coat of filler before paint and i think it will be a gooder !