|
clutch pump on the geaboxx
|
|
03-21-2013, 08:57 PM
Post: #11
|
|||
|
|||
|
clutch slip
If the clutch slave cylinder is found to not be the problem, then check the master cylinder push rod. You need 1mm of free play in the push rod for the master cylinder. If you pre-load the master cylinder piston, it will cover up the return port in the cylinder and not allow the slave cylinder to retract. The adjustment is at the top of the clutch pedal arm. Dave W
|
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
clutch pump on the geaboxx - lifebeginsat8000rpm - 03-14-2013, 09:50 PM
[] - oldeskewltoy - 03-15-2013, 01:35 AM
[] - lifebeginsat8000rpm - 03-15-2013, 09:00 AM
[] - totta Crolla - 03-15-2013, 04:39 PM
[] - Eircamae86 - 03-15-2013, 04:51 PM
[] - lifebeginsat8000rpm - 03-20-2013, 01:40 PM
clutch slip - Dave W - 03-21-2013 08:57 PM
[] - lifebeginsat8000rpm - 03-26-2013, 09:33 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 20v BT - which oil pump? | Mylesmck | 4 | 4,113 |
06-21-2022 04:51 PM Last Post: pack |
|
| Fuel pump issue | DJexor | 11 | 7,658 |
04-29-2022 05:45 AM Last Post: Bean |
|
| fuel line hose from the pump | Wikizz | 4 | 7,078 |
10-16-2017 07:11 PM Last Post: jdm86gtz |
|
| 4age smallport oil pump in bigport engine? | ditn | 2 | 9,096 |
12-06-2014 08:10 PM Last Post: ditn |
|
| Oil pump question | megabob | 2 | 5,538 |
03-05-2014 05:37 AM Last Post: oldeskewltoy |
|
User(s) browsing this thread: 1 Guest(s)