Type of carbs to suit 4ag

[Project D]

FCR are by far the best carbs you can get for throttle response !
For the manifold, if you know an aluminum welder, that's really easy to do.
Some brand like RS-Chita in japan sell manifold specially made for FCR application:
http://www.rschita.jp/fcrcab.htm

For hp, the fact than you can go[u:038703656f] up to[/u:038703656f] 160hp with 40mm carbs doesn't meen you will get 160 with just carb !
You need few other things to get that kind of power like good camshaft etc...


PS: carb have to be tuned with the engine. Don't expect to get your car running like a charm after you install them.

Also a carburator setup cost a little less on parts itself compared to throttle bodies, but it's way more time consumming to fine tune.