The dark side

[fax0815]

What ecu are you running? Omex/ Emerald/ Motec/etc?

Should be not problem if its a proper ECU! If you want it cheap a little bit of soldering a lot of reading and crossreferencing.
There are a few thing different on a 20V BT, idle up valve, rpm signal etc. Not saying it can´t be done but lot of work and still a 20year old loom!
And you gonna need a remap anyway, obviously...

BUT I´d recomend a new custom loom, you can buy the ecu plug with wires/ pins seperate for your ecu (if its no piggy back shit) and use the OEM senders/ connectors and solder it to the new loom, this is also a good way to ditch the dizzy (and avoid buying a relocation kit) for a coil pack.

I´ve just done this at work, 20V blacktop on omex using a new loom with the OEM plugs. Very easy to build and a lot neather as a chopped OEM loom.