probs installing Battle Version #2 kit, please help

[Bean]

fax0815 Wrote:I see your dilemma

So you should really make your own ones! Easy and as long as you`re protecting the rosejoints with a rubber boot, absolutly fine for a dailly.

S13 Arms with the topmouns won´t give you any less tha 3deg of camber I whould have thought...

I've seen the S13 conversion on Hybrid07s car here on the forum and other. Used to live in Belgium before I and some plans went south, so to say.
I did some measurements yesterday evening and extending the LCAs by 30mm along with 8J wheels would call for extending the fenders by ~40mm which is doable but not easy around here (me hating filler with a passion doesn't help). Hence why I was asking for other peoples setups as I want to do this with the minimum amount of extension needed.

As you say I guess I'll have to start at one point. Hopefully a friend can source me some spare arms to start with. Information on that stuff is somewhat incomplete. I found lengths of various arms and the balljoints used but not much beyond that, i.e. if the different balljoints are interchangable etc...

Anyway thanks for your input.