20v silvertop exhaust manifold on 16v 2nd version tvis motor
10-05-2012, 04:58 PM
Post: #7
 
the work is done....the header does not fit with normal or deduction starter !the end....now ....we use an exhaust flange as you will see
and secondly we move the extractor which passes near the starter to 5mm

I dont have feel any difference because i was really in a bad mood

are we sure that this header has better flow than our ours..? i hear opinions

http://www.youtube.com/watch?v=6ncMyGjOJEo&feature=plcp

http://www.youtube.com/watch?v=kqhcBCgVcEE&feature=plcp

4age 16v to FR 20VT
Find all posts by this user


Messages In This Thread
[] - totta Crolla - 10-01-2012, 10:01 PM
[] - Apsogos - 10-02-2012, 09:06 AM
[] - Apsogos - 10-02-2012, 07:45 PM
[] - Apsogos - 10-04-2012, 05:07 PM
[] - Apsogos - 10-04-2012, 07:23 PM
[] - Apsogos - 10-05-2012 04:58 PM
[] - Apsogos - 10-08-2012, 08:59 AM
[] - Apsogos - 11-05-2012, 03:49 PM
[] - oldeskewltoy - 11-07-2012, 08:57 PM
[] - Apsogos - 11-08-2012, 08:43 AM
[] - Apsogos - 11-17-2012, 05:18 PM
[] - ZDoman - 11-17-2012, 07:13 PM
[] - ZDoman - 11-17-2012, 07:24 PM
[] - Apsogos - 11-17-2012, 10:47 PM
[] - ZDoman - 11-22-2012, 08:51 PM
[] - Apsogos - 11-22-2012, 11:15 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  20v Silvertop - New Haltech ECU & Couple of questions 20valver 10 6,846 05-26-2024 07:40 PM
Last Post: totta Crolla
  Smallport inlet manifold totta Crolla 6 5,228 01-17-2022 05:14 PM
Last Post: oldeskewltoy
  20v Silvertop stock ignition timing and fueling maps Lykowsky 5 16,852 07-18-2019 03:52 PM
Last Post: oldeskewltoy
  Early tvis red top from e9 gti small or bigport? Ryo 3 9,057 04-20-2018 09:14 AM
Last Post: Ivan141
  20v silvertop idle issue AlexFourTwenty 3 6,725 12-24-2017 03:27 AM
Last Post: AlexFourTwenty

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication