|
Short stroke suspension
|
|
08-27-2012, 03:04 AM
Post: #6
|
|||
|
|||
totta Crolla Wrote:The question is then, is the lowered ride height worth the There is a set of AE86 coilovers complete with new front spindles, that ships with 8 kg/mm springs for the front. I fantasised about fitting these to my car All I would need to do would be to get some 4 kg/mm springs to soften the "drift style" spring rates for normal road use. Wrong... the front shocks only have about 60mm total travel !! Fitting softer springs would mean hammering the bumpstops. So I had to give that idea away. Spring rate and ride height/suspension travel is always going to be a compromise. Go low and take the big hits, or go high and put up with the body roll. If I get round to spending more cash on my suspension, I will go to a slightly stiffer spring, say 4.5-5.0 kg/mm, and invest in some Bilsteins valved for the application. Quality shocks will improve the ride when you are using stiffer springs. Cheers... jondee86 |
|||
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Short stroke suspension - totta Crolla - 08-25-2012, 06:35 PM
How short is a piece of string ?? - jondee86 - 08-25-2012, 11:41 PM
[] - totta Crolla - 08-26-2012, 07:46 PM
Re: How short is a piece of string ?? - NoHachi - 08-26-2012, 10:21 PM
Re: How short is a piece of string ?? - jondee86 - 08-27-2012, 12:44 AM
[] - jondee86 - 08-27-2012 03:04 AM
[] - totta Crolla - 08-27-2012, 11:15 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| TRD Short Shifter Rattle Noise, It's Normal? | Mattolo | 19 | 25,135 |
04-27-2024 10:04 PM Last Post: banpei |
|
| Bilstein short strokes | Grant | 1 | 5,116 |
05-15-2012 07:32 PM Last Post: NoHachi |
|
| Does anyone know where to buy a short steering hub/boss? | krullibull | 6 | 8,326 |
10-12-2011 10:26 PM Last Post: krullibull |
|
| Long Stroke Springs - Espelier 40mm Tokico ??? | juantonwan | 20 | 21,841 |
05-11-2010 10:31 PM Last Post: jondee86 |
|
| fc3s front brake conversion, short report | speed-inc | 18 | 20,191 |
10-09-2009 06:32 AM Last Post: aussiefan |
|
User(s) browsing this thread: 1 Guest(s)



All I would need to do would be to get some 4 kg/mm 