My 4AGE N/A build

[oldeskewltoy]

Lewy Wrote:

oldeskewltoy Wrote:Good advice... 4AG engines have no real difficulty making hp, they do have a tough time making torque. Not knowing the Catcams as well as some of the other camshaft makers.... Have you checked Dynamic Compression Ratio of your build with the Catcams??


I'd LOVE to see the porting work.... any clear photos of the work performed?

Honestley no i was advised by some one else that the Toda cams would be better suited to my application. How would i go about doing this ? sorry im quite new to these engines and im more used to just bolting on a bigger turbo

Im back in the UK in about 7 days so i can put up a couple of pic's of head ill be using if thats any good

find a DCR calculator..... http://www.google.com/search?q=dynamic+c...ox&ie=&oe=

You will need to gather some information about your build - like bore, stroke, deck height, gasket thickness... everything you need to calculate static compression ratio, and then you need to know camshaft timing, in particular the degree that the intake valve closes


I'd love to see the photos when/if you get the chance.