what 4.7 final ratio??
05-17-2011, 12:18 AM
Post: #6
 
Thanks everyone!

Then it is quite noticeable, ZaX mine is stock too (except two exhaust cams)

Yversion, i didn't thought about newer materials and forging techniques, that's OK

PatrickAE86 Wrote:your tacho still points the same speed / rpm because the signal comes out of the transmission and not out the diff..

but when driving 120 @ 4k on your tacho its about 100/105 on gps..

I thouhgt the signal came from a wheel Huh i think my 86 is my bike

trdtwincam16 hola Echedey, pues "escupe", jeje , son los mismos o de otro fabricante? (Hi, let's tell me, are the same or from other manufacturer?)

[Image: AEU86 AE86 -  ]
[Image: AEU86 AE86 -  ]
Find all posts by this user


Messages In This Thread
what 4.7 final ratio?? - T_AE86 - 05-16-2011, 09:33 PM
[] - yversion - 05-16-2011, 09:39 PM
[] - ZaX - 05-16-2011, 10:19 PM
[] - PatrickAE86 - 05-16-2011, 10:26 PM
[] - trdtwincam16 - 05-16-2011, 11:25 PM
[] - T_AE86 - 05-17-2011 12:18 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Final drive calculation. Aram 31 36,721 12-24-2014 03:08 PM
Last Post: Uzelac
  Ring & pinion ratio. izanagi 27 31,576 07-05-2014 07:35 PM
Last Post: assassin10000
  5.375 final drive ratio with stock T50 4000GT 23 30,099 08-07-2012 01:08 PM
Last Post: 4000GT
  changing diff ratio, broken LSD??? fax0815 6 8,701 09-06-2011 08:19 PM
Last Post: fax0815
  Final Drive ratio - need advise KD2229 12 18,195 08-26-2011 08:33 AM
Last Post: totta Crolla

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication