what 4.7 final ratio??
05-16-2011, 09:39 PM
Post: #2
 
The 4.77 final drives are a great addition to our cars. especially if you are running a LSD with a somewhat stock motor. It gives you much more usable power in the mid to high rpm's.

The Good

*Great acceleration
*Great Braking
*New unit, has not been abused yet.
*Is a stronger unit since it has newer materials and forging techniques.
* NOT 25 years old.

The Bad
* Will make a slight noise (This may differ on the installer, but it will give a very little whine as there is more pressure on the gears.) If you have full interior and installed and shimmed properly you will barely hear it.
*If not installed properly will be very loud and break gears.

K1 Motorworks
14840 Valley Blvd, Unit K
City of Industry, CA 91746
[email protected]
Visit this user's website Find all posts by this user


Messages In This Thread
what 4.7 final ratio?? - T_AE86 - 05-16-2011, 09:33 PM
[] - yversion - 05-16-2011 09:39 PM
[] - ZaX - 05-16-2011, 10:19 PM
[] - PatrickAE86 - 05-16-2011, 10:26 PM
[] - trdtwincam16 - 05-16-2011, 11:25 PM
[] - T_AE86 - 05-17-2011, 12:18 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Final drive calculation. Aram 31 36,721 12-24-2014 03:08 PM
Last Post: Uzelac
  Ring & pinion ratio. izanagi 27 31,576 07-05-2014 07:35 PM
Last Post: assassin10000
  5.375 final drive ratio with stock T50 4000GT 23 30,099 08-07-2012 01:08 PM
Last Post: 4000GT
  changing diff ratio, broken LSD??? fax0815 6 8,701 09-06-2011 08:19 PM
Last Post: fax0815
  Final Drive ratio - need advise KD2229 12 18,195 08-26-2011 08:33 AM
Last Post: totta Crolla

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication