|
Wossner forged pistons
|
|
02-16-2011, 07:03 PM
Post: #3
|
|||
|
|||
|
often it isn't the company making it, but their design of the piston that matters most.
In my experience a flat crown on the piston top is far better for performance then a steep crown. The reasons are 2 fold, 1) a high crown tends to come to a point which can lead to that point getting too hot and causing ping, 2) The high crown damages flow Dan - You can |  .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Wossner forged pistons - drako323 - 02-16-2011, 10:53 AM
Re: Wossner forged pistons - Uzelac - 02-16-2011, 12:39 PM
[] - oldeskewltoy - 02-16-2011 07:03 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 82mm Stock compression Pistons | apardal | 4 | 3,415 |
11-24-2021 04:26 PM Last Post: apardal |
|
| Small Port 10.3 Pistons | Alex170984 | 1 | 4,695 |
10-25-2016 09:18 PM Last Post: oldeskewltoy |
|
| Machining Pistons to run 20v head... And FCR's on a 20v? | PazzaAE86 | 2 | 5,502 |
09-15-2013 01:08 AM Last Post: jondee86 |
|
| 9.4:1 or 10:1 pistons? | thanos | 14 | 22,276 |
08-01-2013 12:50 PM Last Post: Ivan141 |
|
| Wiseco Pistons and Oil Squirters | slacker.cam | 1 | 3,619 |
05-15-2012 12:02 AM Last Post: slacker.cam |
|
User(s) browsing this thread: 1 Guest(s)