Idle problems

Threaded Mode | Linear Mode

Idle problems

12-26-2010, 10:16 PM

Post: #43

jondee86 Offline

Posting Freak

Posts: 947
Joined: Apr 2007
Reputation: 1

max_ae86 Wrote:So, after cleaning AAV and bleeding cooling system of air bubbles, I got
900 rpm warm idle Not bed as there is -1 C outside. Of course, it
could be better but as I don't have this adjusting tool 900 rpm is better
then 1200-1300 as before.

Now that you have the AAV working correctly, you can make small
adjustments to the warm idle with the Idle Air Adjustment Screw that
is located down the tube at the side of the throttle body. Sometimes
there is a black rubber cap on top of the tube. Turn the screw clockwise
to lower the idle speed.

Cheers... jondee86

« Next Oldest | Next Newest »

Messages In This Thread

Idle problems - filh - 02-21-2009, 10:57 PM

[] - tolisspi - 02-21-2009, 11:44 PM

[] - filh - 02-22-2009, 01:00 AM

[] - gtsr54321 - 02-22-2009, 06:44 AM

[] - jondee86 - 02-22-2009, 10:30 AM

[] - Ivan141 - 02-22-2009, 11:53 AM

[] - filh - 02-22-2009, 03:38 PM

[] - The Doctor - 02-22-2009, 04:01 PM

[] - Sanity Clause - 02-22-2009, 07:55 PM

[] - filh - 02-23-2009, 01:00 AM

[] - filh - 02-25-2009, 12:36 AM

[] - Sanity Clause - 02-26-2009, 06:41 PM

[] - filh - 02-28-2009, 01:01 AM

[] - jondee86 - 02-28-2009, 10:14 AM

[] - parrot - 02-28-2009, 01:10 PM

[] - Sanity Clause - 02-28-2009, 02:26 PM

[] - filh - 03-01-2009, 02:24 AM

[] - parrot - 03-01-2009, 03:21 AM

[] - jondee86 - 03-01-2009, 04:16 AM

[] - JonnyAE86 - 03-01-2009, 05:21 AM

[] - filh - 03-01-2009, 07:57 PM

[] - jondee86 - 03-02-2009, 01:39 AM

[] - filh - 03-05-2009, 01:26 AM

Suddenly, it all makes sense :) - jondee86 - 03-05-2009, 10:02 AM

[] - Snejk - 03-06-2009, 06:34 PM

[] - filh - 03-11-2009, 01:54 AM

[] - alimonos - 03-11-2009, 10:20 AM

[] - filh - 03-12-2009, 01:14 AM

Bouncing Idle - shawnho - 03-30-2009, 07:45 AM

Re: Bouncing Idle - jondee86 - 03-30-2009, 08:43 AM

[] - filh - 03-30-2009, 01:43 PM

Bouncing Idle Fixed - shawnho - 04-01-2009, 04:03 AM

[] - filh - 09-16-2010, 10:44 PM

Ghost in the machine :) - jondee86 - 09-17-2010, 12:03 AM

[] - filh - 09-21-2010, 10:57 PM

[] - max_ae86 - 12-23-2010, 10:18 AM

[] - max_ae86 - 12-24-2010, 09:33 AM

[] - max_ae86 - 12-25-2010, 08:05 PM

[] - max_ae86 - 12-26-2010, 05:16 PM

[] - Hachi - 12-26-2010, 05:27 PM

[] - Ivan141 - 12-26-2010, 06:15 PM

[] - Hachi - 12-26-2010, 07:59 PM

[] - jondee86 - 12-26-2010 10:16 PM

[] - max_ae86 - 12-26-2010, 11:11 PM

[] - max_ae86 - 12-26-2010, 11:34 PM

[] - Hachi - 12-27-2010, 02:34 AM

[] - max_ae86 - 12-27-2010, 10:03 AM

[] - max_ae86 - 12-27-2010, 10:58 AM

[] - irishtwincam - 01-13-2011, 12:49 PM

[] - max_ae86 - 01-13-2011, 01:23 PM

[] - max_ae86 - 01-13-2011, 01:34 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	No idle below 2000 rpm rich running	Steller Engineering	3	3,055	11-30-2022 02:45 PM Last Post: RolanTHUNDER
	Engine starts/revs but no idle	GenkiMotors	17	12,277	11-20-2021 04:12 AM Last Post: GenkiMotors
	Big wheel problems	gh0st	16	13,095	11-15-2021 10:51 PM Last Post: gh0st
	Starting problems 4-AGE kouki	Hanzo	3	4,225	08-31-2021 06:20 PM Last Post: totta Crolla
	exhaust odor/idle MOT issue	Ryo	7	10,037	07-15-2019 09:17 AM Last Post: jondee86

User(s) browsing this thread: 1 Guest(s)