Hello there out a rather small country called: Holland (NL)

[CA86]

don't get me wrong...

If the 86 came to me in a reasonable standard condition

I would probably put a 4AGE engine in...

I only have a rolling shell...

And nearly everything needs an overhaul, or redoing...

This'll be a long project...

Rust is primary, as mentioned before...

After that I'm going to attempt to acquire a good weight of the stripped chassis...

So I can determine the CoG (Center of gravity) of the chassis (for my, already prepped files) to end up (once I've acquired the other CoGs of the parts) with a reasonable approximation of steering characteristics, forces (lateral, longitudinal, vertical, etc), loads strains, etc.

Or if any of you have X,Y,Z coordinates of parts, weight distribution, etc ... I can already produce some (fun) graphs which chart the theoretical steering behavior of your car... (depending on the stiffness of things like tyres, bushings, springs and dampeners)

I'll try to post an example of the steering characteristics graph later this evening if you're interested...