|
10% faster ?
|
|
12-07-2010, 03:51 PM
Post: #15
|
|||
|
|||
|
As for what to use as you have it already I'd go for the cams and freedome ecu (if you know someone to map it) along with what you have on there now so modified smallport intake etc... that should be good for 7500rpm if you could stretch for underbucket shims you can take it to 8krpm all day long. This is with a healthy bottom end. Weakes part ob the bottom end for high revs are the conrod bolts as they tend to stretch too much at high rpm.
As you are in uk try getting hold of BenR from awt.co.uk he built a couple of very good 4A-GEs AE86 ex-daily |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
10% faster ? - totta Crolla - 12-06-2010, 11:41 AM
[] - totta Crolla - 12-06-2010, 07:49 PM
[] - totta Crolla - 12-07-2010, 01:11 PM
[] - Bean - 12-07-2010 03:51 PM
Re: 10% faster ? - oldeskewltoy - 12-08-2010, 06:03 AM
Re: 10% faster ? - Uzelac - 12-08-2010, 10:58 AM
[] - totta Crolla - 12-08-2010, 12:50 PM
[] - totta Crolla - 12-08-2010, 01:45 PM
Re: 10% faster ? - allencr - 12-08-2010, 09:31 PM
[] - oldeskewltoy - 12-11-2010, 02:24 AM
[] - oldeskewltoy - 01-02-2011, 11:11 PM
[] - totta Crolla - 01-03-2011, 02:40 PM
|
User(s) browsing this thread: 1 Guest(s)