|
what forged pistons brand
|
|
10-28-2010, 01:24 AM
Post: #21
|
|||
|
|||
|
Thanks OldeskewlToy . I understand better now ( why chambers were enlarged ).
Already messed up a head .Enlarging a little the exhaust port , i did it too much (thought it wasn't much) , near the valves guide . There's one 5mm dia , hole , in water port . 1 head out .  Starting a "new" one , but only polish work. We're a little far from each other , othewise , I would have ordered a modified head from you . But it"s nearly impossible with delivery fees and customs taxes . thanks for your pics and info . Filh Save the RWD cars |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
what forged pistons brand - filh - 10-06-2010, 12:25 AM
[] - totta Crolla - 10-07-2010, 11:10 AM
[] - oldeskewltoy - 10-09-2010, 07:48 PM
[] - oldeskewltoy - 10-10-2010, 06:35 PM
[] - totta Crolla - 10-18-2010, 03:23 PM
[] - oldeskewltoy - 10-24-2010, 05:20 AM
[] - filh - 10-28-2010 01:24 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 82mm Stock compression Pistons | apardal | 4 | 4,086 |
11-24-2021 04:26 PM Last Post: apardal |
|
| Small Port 10.3 Pistons | Alex170984 | 1 | 5,098 |
10-25-2016 09:18 PM Last Post: oldeskewltoy |
|
| Machining Pistons to run 20v head... And FCR's on a 20v? | PazzaAE86 | 2 | 5,991 |
09-15-2013 01:08 AM Last Post: jondee86 |
|
| 9.4:1 or 10:1 pistons? | thanos | 14 | 23,438 |
08-01-2013 12:50 PM Last Post: Ivan141 |
|
| Wiseco Pistons and Oil Squirters | slacker.cam | 1 | 3,898 |
05-15-2012 12:02 AM Last Post: slacker.cam |
|
User(s) browsing this thread: 1 Guest(s)