turbo 4age with 4agze pistons HELP
10-27-2010, 12:29 AM
Post: #7
 
Do you have access to a machinist?

The inside of the small end of the connecting rod can be enlarged from 18mm to 20mm.

As long as rpm levels stay under 7500 there should be no problem. rpm levels exceeding 7500 may be a problem


photos of 4AG stock connecting rods
[Image: AEU86 AE86 -  ]

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user


Messages In This Thread
[] - jdm86gtz - 10-26-2010, 09:24 PM
[] - filip.alin - 10-26-2010, 09:41 PM
[] - filip.alin - 10-26-2010, 09:47 PM
[] - jdm86gtz - 10-26-2010, 10:04 PM
[] - filip.alin - 10-26-2010, 10:18 PM
[] - oldeskewltoy - 10-27-2010 12:29 AM
[] - filip.alin - 10-27-2010, 10:04 PM
[] - oldeskewltoy - 10-28-2010, 06:28 PM
[] - filip.alin - 10-28-2010, 08:57 PM
[] - oldeskewltoy - 10-29-2010, 12:30 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  82mm Stock compression Pistons apardal 4 3,892 11-24-2021 04:26 PM
Last Post: apardal
  whats the crack with 16v turbo? kazi 5 7,402 08-02-2017 12:15 AM
Last Post: kazi
  Small Port 10.3 Pistons Alex170984 1 4,987 10-25-2016 09:18 PM
Last Post: oldeskewltoy
  Bluetop on turbo leon205gti 7 9,205 09-20-2016 09:17 PM
Last Post: leon205gti
  can i just slam a oem turbo on it ? MC_JP 3 6,992 12-17-2014 11:04 PM
Last Post: oldeskewltoy

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication