|
what forged pistons brand
|
|
10-18-2010, 03:23 PM
Post: #18
|
|||
|
|||
|
Phil, honestly I think a smallport is the way forward. I was having exactly the same issues as you, and yes I may have to eat my words but so far the smallport seems a better rally engine. Better torque band and you don't need to rev them so high. They will of course go to the limiter, like a bigport but not as eager but they perform better in the mid range.
I'm going to do some more 30-60mph times as a comparison. To avoid the wiring issues I run mine on the bigport ecu with all of the bigport sensors and injectors so the performance is probably a bit off of a proper smallport setup. An analogue brain in a digital World |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
what forged pistons brand - filh - 10-06-2010, 12:25 AM
[] - totta Crolla - 10-07-2010, 11:10 AM
[] - oldeskewltoy - 10-09-2010, 07:48 PM
[] - oldeskewltoy - 10-10-2010, 06:35 PM
[] - totta Crolla - 10-18-2010 03:23 PM
[] - oldeskewltoy - 10-24-2010, 05:20 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 82mm Stock compression Pistons | apardal | 4 | 3,538 |
11-24-2021 04:26 PM Last Post: apardal |
|
| Small Port 10.3 Pistons | Alex170984 | 1 | 4,741 |
10-25-2016 09:18 PM Last Post: oldeskewltoy |
|
| Machining Pistons to run 20v head... And FCR's on a 20v? | PazzaAE86 | 2 | 5,579 |
09-15-2013 01:08 AM Last Post: jondee86 |
|
| 9.4:1 or 10:1 pistons? | thanos | 14 | 22,491 |
08-01-2013 12:50 PM Last Post: Ivan141 |
|
| Wiseco Pistons and Oil Squirters | slacker.cam | 1 | 3,659 |
05-15-2012 12:02 AM Last Post: slacker.cam |
|
User(s) browsing this thread: 1 Guest(s)