|
what forged pistons brand
|
|
10-08-2010, 01:09 AM
Post: #10
|
|||
|
|||
|
Fillh,
have you worked the water and oil channels of the bottom end of the engine? There is alot to gain in flow which should help the cooling. In you case I would buy a 20v bottom end buy toda pistons (wiseco's dome is really not that good with the pointy roof) Use either sports thermostat or no thermostat (need enough cooling) Don't shave the head. Always shave the block.(only shave the head to get it straight) I assume you have a bigger radiator etc? Where is your rev limiter? Is the crank and rods balanced? Cars: "99 Lexus IS200 "86 AE86 Kouki Panda Levin GT-Apex (restore project) "84 AE86 Zenki Blue Levin (project racer) Motorcycles: "02 Yamaha R1 "02 Honda Hornet S "08 BMW R1200GS |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
what forged pistons brand - filh - 10-06-2010, 12:25 AM
[] - totta Crolla - 10-07-2010, 11:10 AM
[] - robokill - 10-08-2010 01:09 AM
[] - oldeskewltoy - 10-09-2010, 07:48 PM
[] - oldeskewltoy - 10-10-2010, 06:35 PM
[] - totta Crolla - 10-18-2010, 03:23 PM
[] - oldeskewltoy - 10-24-2010, 05:20 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 82mm Stock compression Pistons | apardal | 4 | 4,099 |
11-24-2021 04:26 PM Last Post: apardal |
|
| Small Port 10.3 Pistons | Alex170984 | 1 | 5,115 |
10-25-2016 09:18 PM Last Post: oldeskewltoy |
|
| Machining Pistons to run 20v head... And FCR's on a 20v? | PazzaAE86 | 2 | 6,004 |
09-15-2013 01:08 AM Last Post: jondee86 |
|
| 9.4:1 or 10:1 pistons? | thanos | 14 | 23,465 |
08-01-2013 12:50 PM Last Post: Ivan141 |
|
| Wiseco Pistons and Oil Squirters | slacker.cam | 1 | 3,901 |
05-15-2012 12:02 AM Last Post: slacker.cam |
|
User(s) browsing this thread: 1 Guest(s)