|
Car not igniting 20V Omex ECU
|
|
07-03-2010, 03:20 AM
Post: #5
|
|||
|
|||
|
It would be unusual to have the ignition power supply coming from the
ECU. As said above, the power usually comes from a separate circuit, that bypasses the ECU. In the factory wiring it comes from the keyswitch. The ECU pulls the coils to ground to fire them, but if there is not 12V on the positive side of the coils.... then there will be no spark. Check and see if the 12V for the coil really does come from the ECU, or from some place else. Cheers... jondee86 |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Car not igniting 20V Omex ECU - Jezza_hr - 07-02-2010, 10:43 PM
[] - jondee86 - 07-03-2010 03:20 AM
Medical mysteries have nothing on this !!! - jondee86 - 07-03-2010, 07:57 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 20v Silvertop - New Haltech ECU & Couple of questions | 20valver | 10 | 6,355 |
05-26-2024 07:40 PM Last Post: totta Crolla |
|
| 20v BT conversion ECU | izanagi | 5 | 8,371 |
06-14-2016 02:39 PM Last Post: izanagi |
|
| 20V blacktop. what kind off ecu??? | slowboy2 | 11 | 16,662 |
07-17-2015 07:01 PM Last Post: jdm86gtz |
|
| 16V ECU pinout on 20v swap | pack | 2 | 6,932 |
06-12-2015 01:22 AM Last Post: pack |
|
| Machining Pistons to run 20v head... And FCR's on a 20v? | PazzaAE86 | 2 | 6,153 |
09-15-2013 01:08 AM Last Post: jondee86 |
|
User(s) browsing this thread: 1 Guest(s)