Small port engine

[jondee86]

If you have the original bigport RWD, just strip everything you need
from the bigport and swap it onto the smallport. If you get an inlet
adapter plate, you can use the bigport manifold, injectors, harness and
ECU. Easy peasy, but you don't get the torque benefit from the smallport
inlet manifold design.

If you cut-n-shut the smallport manifold, you should use the smallport
injectors and ECU. Means a lot of rewiring, and you would need a FWD
smallport engine harness to butcher for the plugs. Smallport JDM injectors
are high impedence, so no resistors required.

Cheers... jondee86