Manifold Vacuum on 16V with ITB's...
04-15-2010, 10:57 AM
Post: #7
Lesson... don't just THINK you know your cam timing !!
Looks as so I have a cam timing problem Blush Just moved the cams
around a bit, and now I have 45 kPa of vacuum. I'm going to degree the
cams and then try a few different settings. I'd be happy if I could get
around 55-60 kPa at idle Smile

Cheers... jondee86
Find all posts by this user


Messages In This Thread
[] - isac - 04-11-2010, 11:30 PM
[] - jondee86 - 04-12-2010, 03:05 AM
[] - alimonos - 04-12-2010, 07:43 AM
[] - jondee86 - 04-12-2010, 10:15 AM
[] - isac - 04-12-2010, 03:13 PM
Lesson... don't just THINK you know your cam timing !! - jondee86 - 04-15-2010 10:57 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Smallport inlet manifold totta Crolla 6 4,058 01-17-2022 05:14 PM
Last Post: oldeskewltoy
  How to install 20V ITB on 16V head Mr.komp 7 12,637 12-28-2015 05:35 PM
Last Post: pack
  US-spec vacuum hard lines LordTD 2 5,557 04-27-2015 07:18 PM
Last Post: Project D
  4age blue top from MR2 same intake manifold? dinkers542 8 11,523 11-02-2014 05:24 PM
Last Post: ditn
  VALVE ASSY, VACUUM SWITCHING, what's this for ? Uzelac 10 15,940 11-22-2013 10:40 PM
Last Post: jondee86

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication