T3 FULL coil over system (front and rear), who is using them

[XJS]

Same setup here, daily driver, no chassis reinforcements, full T3 front and rear, Prothane bushings all around. The top clearance issues at the rear solved with hammering. Started using the kit with 195mm Eibach 5kg rear, 6kg front, it's a bit too hard for everyday use in Budapest (I bet we have larger potholes than Greece ). The rear springs are really short so helper springs are necessary. I've no problem with the AGXs, despite the rear adjustement looks like an on/off switch, the second position just a little bit softer than the 4th, but for everyday use the 1st pos. looks OK, enough travel, fairly linear compression and rebound.

Because of the stiffness and lenght issues, ordered 4pcs of 210mm Tanabe 4kg springs for $15 each last autumn (more-japan has crazy sales sometime), just installed it two weeks ago. It feels great at the rear, but the softness in the front causing problems with the ride height for me. (I'm using 15x6.5 ET21 Supras with 2cm spacer with 195/45 because of my brake setup, I need to be very careful with the height otherwise rubbing the fender.

I'll try to change to fronts back to the Eibach, the 5kg/mm this time, but definitely will keep the 4kg/mm Tanabe at the back.