Manifold Vacuum on 16V with ITB's...

[jondee86]

alimonos Wrote:can you give me the tps only map ? i am going to setup a greddy
e-manage ultimate with itbs too ... :wink:

The map I have is just some line values I put in to make a startup map.
It was set up for VE tuning, with the first line 35%VE @ 0% TPS, rising
incrementally to 90%VE @ 65% TPS. Everything above 65% TPS is @
90%VE, and all lines have the same value from 0 to 8000 rpm.

The engine runs on this map with good A/F ratios, but I haven't tuned
the idle properly yet. The self-tune function has completed a few cells,
and they are not far off the numbers I started with. I really don't think
the map would be of any help with what you are trying to do. Better
for you to use a WBO2 gauge and adjust your settings until you get a
good A/F ratio.

Cheers... jondee86