The Virtue Z

[doggy]

Touge86 Wrote:^Thanks!
Well I was talking to a friend on my way home today and kinda got excited to do some work on my car. The only issue was getting done before the sun went away. Anyway, I got home and found something horrible, my hood had tipped over onto my passenger fender flare and cracked the flare! I definitely don't think I'm ready for kids as they say this is the daily chaos you deal with.

Well - heres what you can do about this Flare:

get your self Epoxyd resin - but get Epoxyd not Polister one. Mix it up like for normal use - when get a medical syringe - prefarible 20ml one (bigger) and the biggest needle to go on it. Fill it up with epoxyd - and squize everything in the cracked place. It will be hard to do so - cuz of the epoxyd beeing thick. You will see how this crack will be filled up with the epoxyd and it will disapear. Let it dry - and then sand the overruns that will go outside of the crack with some 1200wet grit, later with 1500, and finish it off with the 2000. After this - some polishing - and it will be set

I fixed the same way LOTS of CF parts - hoods / flares / spoilers Its not soo hard - and it will save you a lot of $