Exhaust gets REALLY warm, mild 4AGE build running MS

Threaded Mode | Linear Mode

Exhaust gets REALLY warm, mild 4AGE build running MS

03-15-2010, 08:31 PM

Post: #10

Martin Bjerre Offline

Junior Member

Posts: 20
Joined: Mar 2006
Reputation: 0

Hello Im Martin and are also working on the car while Niels is in China.
The Megatune program is version 2,25 p3
we have checked the timing with ignition lamp. and the real timing is identical with the map, and we have tried (as wrote before) to lock the ignition at 40 degrees and let engine run about 2500-3000 rpm same time checking with ignition lamp. but in few minutes the exhaust manifold is glowing. I have check the valve clearence and check valves for leak with air in spark plug holes and it seems okay. the cam timing is also okay.
I have checked that the timming mark on the belt wheel is at right position when piston is in top.
this is wird.

http://www.bjerre-rally.dk

« Next Oldest | Next Newest »

Messages In This Thread

Exhaust gets REALLY warm, mild 4AGE build running MS - Jan Pedersen - 03-14-2010, 10:39 PM

[] - einneb - 03-14-2010, 10:45 PM

[] - Jan Pedersen - 03-14-2010, 10:47 PM

[] - Bean - 03-15-2010, 03:07 AM

[] - harkes - 03-15-2010, 03:45 AM

[] - Bean - 03-15-2010, 04:02 AM

[] - Morten - 03-15-2010, 05:06 PM

[] - Jimmi The Kid - 03-15-2010, 06:59 PM

[] - Jan Pedersen - 03-15-2010, 08:17 PM

[] - Martin Bjerre - 03-15-2010 08:31 PM

[] - Bean - 03-15-2010, 08:31 PM

[] - Ivan141 - 03-15-2010, 10:07 PM

[] - [Walaki]D`Lair - 03-15-2010, 10:17 PM

[] - Nomuken - 03-15-2010, 11:36 PM

[] - harkes - 03-16-2010, 02:43 AM

[] - harkes - 03-16-2010, 06:43 AM

[] - Gnugfur - 03-16-2010, 08:46 AM

[] - Jan Pedersen - 03-16-2010, 09:43 AM

[] - Gnugfur - 03-16-2010, 09:57 AM

[] - Nomuken - 03-16-2010, 12:12 PM

[] - Jimmi The Kid - 03-16-2010, 12:28 PM

[] - harkes - 03-16-2010, 01:13 PM

[] - Gnugfur - 03-16-2010, 01:31 PM

[] - Nomuken - 03-16-2010, 01:50 PM

[] - Jimmi The Kid - 03-16-2010, 02:42 PM

[] - Nomuken - 03-16-2010, 02:54 PM

[] - harkes - 03-16-2010, 08:17 PM

[] - Martin Bjerre - 03-16-2010, 09:55 PM

[] - Bean - 03-16-2010, 10:24 PM

[] - Jan Pedersen - 03-16-2010, 10:30 PM

[] - Bean - 03-16-2010, 10:36 PM

[] - Gnugfur - 03-16-2010, 11:36 PM

[] - Ivan141 - 03-17-2010, 12:03 AM

[] - harkes - 03-17-2010, 07:58 AM

[] - harkes - 03-17-2010, 08:20 AM

[] - Bean - 03-17-2010, 09:40 AM

[] - Gnugfur - 03-17-2010, 09:48 AM

[] - totta Crolla - 03-17-2010, 11:18 AM

[] - Nomuken - 03-17-2010, 02:17 PM

[] - Martin Bjerre - 03-21-2010, 10:06 AM

[] - Martin Bjerre - 03-21-2010, 10:19 AM

[] - einneb - 03-21-2010, 03:01 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	7AGE Build	apardal	5	2,785	08-02-2024 12:11 PM Last Post: apardal
	Warm start problem	DJexor	5	3,715	03-09-2023 10:15 AM Last Post: Ivan141
	No idle below 2000 rpm rich running	Steller Engineering	3	2,579	11-30-2022 02:45 PM Last Post: RolanTHUNDER
	Running issues	sam3007	6	4,191	06-26-2022 01:34 PM Last Post: Dave W
	4age 16v running roughly - diagnostics shows unknown code	Ryo	8	9,761	11-09-2020 10:51 AM Last Post: totta Crolla

User(s) browsing this thread: 1 Guest(s)