mild cams... is it worth it?

Threaded Mode | Linear Mode

mild cams... is it worth it?

01-26-2010, 04:32 PM

Post: #4

Bean

AEU86 oldtimer

Posts: 2,588
Joined: Jul 2006
Reputation: 1

catcam 7105137 was working good on robokills car - this is at the limit of the stock valvesprings and ECU - I think his was running a bit lean at the top - his bottomend was rebuild with bigger pistons though and higher CR if I'm not mistaken. iirc they are 399Euro for the set (cam wheels aren't necessary either - especialy as long as you run the stock ECU).

I myself will go for 7105148 or 9 but this needs quite some changes to the valvetrain... I intend to keep it as dailydriver too but then again I'm not too fused about economy Smile

EDITED price as I made a typo

AE86 ex-daily

« Next Oldest | Next Newest »

Messages In This Thread

mild cams... is it worth it? - megabob - 01-26-2010, 02:17 PM

[] - Bean - 01-26-2010, 04:18 PM

[] - megabob - 01-26-2010, 04:26 PM

[] - Bean - 01-26-2010 04:32 PM

[] - megabob - 01-26-2010, 04:43 PM

[] - PatrickAE86 - 01-26-2010, 07:49 PM

[] - Ivan141 - 01-26-2010, 08:40 PM

[] - PatrickAE86 - 01-26-2010, 09:58 PM

[] - Bean - 01-26-2010, 11:02 PM

[] - ZDoman - 01-27-2010, 12:00 AM

[] - Bean - 01-27-2010, 12:17 AM

[] - megabob - 01-27-2010, 11:40 AM

[] - NonStopTuning - 02-27-2010, 08:12 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Shim size for AM cams	kazi	4	6,826	12-18-2017 05:34 PM Last Post: oldeskewltoy
	Toda Cams	Alex170984	7	10,761	02-11-2017 05:50 PM Last Post: Alex170984
	20V cams - CATCAMS vs KELFORD?	Grant	19	44,418	11-19-2015 07:45 AM Last Post: hachirokkos
	Effects of valve lift - worth it going higher?	harkes	18	21,296	03-17-2014 09:21 PM Last Post: oldeskewltoy
	cams cams cams	megabob	60	69,203	12-31-2013 01:19 AM Last Post: gze spec

User(s) browsing this thread: 1 Guest(s)