O2 sensor question
01-24-2010, 01:01 AM
Post: #2
 
see if your tomei sensor puts out a dummy (narrowband) signal that you can wire into the loom. Lots of aftermarket sensor can do this (innovate for example) - that is if your tomei is wideband - if it's narrowband anyway then just splice it into your original loom.

if above is possible fit your tomei sensor in place of the original as the place on top of the manifold was intended for the EGR system and AFR/lambda sensor don't like too much hit for prolonged time (bosch ones are rated around 700°C)

AE86 ex-daily
Visit this user's website Find all posts by this user


Messages In This Thread
O2 sensor question - alex-evo - 01-23-2010, 08:10 PM
[] - Bean - 01-24-2010 01:01 AM
[] - alex-evo - 01-24-2010, 03:49 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Lambda sensor wiring sam3007 10 5,366 05-23-2022 10:00 PM
Last Post: The Doctor
  AE86 Engine Coolant Temp Sensor izanagi 8 21,330 09-06-2014 05:47 PM
Last Post: izanagi
  Hall sensor totta Crolla 7 8,742 02-28-2014 10:07 AM
Last Post: Ivan141
  Video : Adjust the TPS (Throttle Pos Sensor) on the 4A-GE Homem Bomba 3 11,725 10-25-2013 05:13 PM
Last Post: Apsogos
  1/8 BSPT adapter for oil pressure sensor Dino86 4 7,524 06-15-2013 12:34 PM
Last Post: S.K.

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication