Impreza Group-N project.

[Aram]

Small update.

Not actually the car itself this time, but something that will help build the car when it's done and works.

I removed a welder from the burned factory, it's a Fronius Magic Wave 3000 Job.
It was a year old and apart from 2 parts and alot of smoke it seemed to be fine.

I don't know if it works yet, but I cleaned it before I test that anyway.
2 reasons for that, the smokedust can conduct electricitity and there was cristal forming everywhere, also between the components on the circuit boards, so to reduce the chance of a shortcut I cleaned it anyway.

This is how it looked when I got it:








And then dismantling it:










Undertray:




The alu plates were acid cleaned, the bolts yellow plated and the circuit boards proffesionaly cleaned.
The casing I left as is for now, first I want to know if it works.


The parts cleaned, note the white on the alu parts, it is corroded by the chlore in the water that they used to put out the fire, nasty stuff :








Building again:














That's it sofar, this week i'll test it, then if it doesn't explode I will order some parts that I need to actually weld with it, and if that works I will clean the rest.