Emanage set up

[eight-six]

Quote:We wasn't able to get injector signal so/and we can't change the duty cycle. We've tried it several ways, but it wasn't working so Z sold it and he uses now Megasquirt. I'm really interested in this, if someone could make it work on AE86. Lot of people use it with AE92 late (smallport) harness. I think it also can work with AFM, but not the MAP AE86!

It’s definitely been used before and I can’t see why it would run fine on a MAP sensored small port but not a MAP sensored big port? Currently looking into the injector signal issue now – its picking up injector pulses for channels ½ but saying it doesn’t have a signal for ¾. One suggestion is to group 1/3 and 2/4 on the Emanage and see if that works? Should be an easy test at least.

What ways did you try so I can understand what you did?

What I still can’t understand is why the fuelling is off despite all the maps being set to zero.

Also if you mapping a NA engine will I need to worry about injector duty cycle anyway, surely you can just adjust the map readings for more fuel?

Going to have a look at it tonight if I get around to it.