Advan A3A need quick help

Threaded Mode | Linear Mode

Advan A3A need quick help

06-20-2009, 03:11 PM

Post: #36

banpei

Super Moderator

Posts: 11,780
Joined: Aug 2004
Reputation: 9

I still think you would be better off with the Toyota wheelnuts for the CS rims: they cover the outside and 50% of the inside of the hole, while the ones you have only cover a small part of the inside of the hole. However if you specifically ask Toyota for the CS nut they will ask 8,20 euro per nut! Huh

I managed to find a set through Marktplaats with a later type of these nuts (part number 90942-01033) for only 50 euros.
dAYTONA said he could get them for cheap as well:
http://www.aeu86.org/viewtopic/wheelnuts...kii/t/7176

BTW: I did use the OEM nuts to mount the rims under the car and get MOT (only 500 meters from my house). I would not recommend that: it was a lot of work to get the rims centered on all four studs and I was afraid I would damage the rims. After I removed those nuts I could already see minor damage on the holes after those 500 meters: so don't do it! Blush

1983 - AE86 Sprinter Trueno - import project
2013 - Honda Civic sport - daily driver
2004 - AEU86 dot ORG - daily domain

Support our forum, buy from the AEU86 shop:

« Next Oldest | Next Newest »

Messages In This Thread

Advan A3A need quick help - Ryo - 09-25-2007, 10:06 AM

[] - DJexor - 09-25-2007, 10:23 AM

[] - Ryo - 09-25-2007, 10:46 AM

[] - DJexor - 09-25-2007, 01:04 PM

[] - Ryo - 09-25-2007, 03:26 PM

[] - DJexor - 09-25-2007, 03:55 PM

[] - Apolan - 09-25-2007, 07:20 PM

[] - gon - 09-25-2007, 07:45 PM

[] - Ryo - 09-25-2007, 09:59 PM

[] - oldskull - 09-25-2007, 10:34 PM

[] - DJexor - 09-26-2007, 12:19 AM

[] - Ryo - 09-26-2007, 11:15 AM

[] - cannabolic - 09-26-2007, 11:38 AM

[] - Apolan - 09-26-2007, 12:29 PM

[] - Ryo - 09-26-2007, 01:19 PM

[] - nmwisima - 09-26-2007, 02:49 PM

[] - Ryo - 09-26-2007, 03:50 PM

[] - cannabolic - 09-26-2007, 03:57 PM

[] - Ryo - 09-26-2007, 04:22 PM

[] - ts@n@k@s - 09-26-2007, 04:51 PM

[] - Ryo - 09-29-2007, 12:15 AM

[] - E-volve - 09-29-2007, 03:25 AM

[] - Ryo - 09-29-2007, 09:04 AM

[] - ts@n@k@s - 09-29-2007, 07:19 PM

[] - Ryo - 09-29-2007, 07:53 PM

[] - oldskull - 09-29-2007, 08:08 PM

[] - Ryo - 09-29-2007, 08:19 PM

[] - oldskull - 09-29-2007, 08:22 PM

[] - Ryo - 10-16-2007, 12:36 PM

[] - Ryo - 02-29-2008, 11:54 AM

[] - AEsuperG - 02-29-2008, 01:15 PM

[] - Ryo - 02-29-2008, 04:07 PM

[] - AEsuperG - 02-29-2008, 04:16 PM

[] - Ryo - 02-29-2008, 04:19 PM

[] - Ryo - 06-20-2009, 02:21 PM

[] - banpei - 06-20-2009 03:11 PM

[] - Apolan - 06-20-2009, 03:25 PM

[] - Ryo - 06-21-2009, 12:10 AM

[] - Apolan - 06-21-2009, 02:43 AM

[] - banpei - 06-21-2009, 02:44 PM

[] - Ivan141 - 06-21-2009, 03:01 PM

[] - Apolan - 06-21-2009, 03:37 PM

[] - Ryo - 06-21-2009, 11:27 PM

[] - Apolan - 06-22-2009, 02:38 AM

[] - Ryo - 06-04-2010, 08:18 PM

[] - Ivan141 - 06-05-2010, 12:06 AM

[] - banpei - 06-05-2010, 10:47 PM

[] - Ryo - 06-07-2010, 04:28 PM

[] - Ryo - 06-07-2011, 06:21 PM

RE: Advan A3A need quick help - conal g - 09-23-2014, 04:34 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Windshield. Need Help.	Roma_trueno	13	23,310	02-02-2026 02:19 PM Last Post: totta Crolla
	Need help installing replica "OEM" sideskirts	sheppardpat47	1	345	01-30-2026 11:16 AM Last Post: Ivan141
	Need help identifying this!	takumi_mt	4	2,620	04-05-2024 09:17 AM Last Post: takumi_mt
	TRD ECU need help	ps13michi	5	6,359	02-18-2022 10:42 AM Last Post: ps13michi
	4age hitting gas too quick means engine stalls - what is the issue?	Ryo	20	36,842	06-27-2018 11:15 PM Last Post: Ryo

User(s) browsing this thread: 1 Guest(s)