|
Idle problems
|
|
02-22-2009, 10:30 AM
Post: #5
|
|||
|
|||
|
Try winding out the idle air screw (the one down the hole on the side
of the throttle body). Oh, and the other thing that you should try, is blocking off the idle air bypass port in front of the throttle butterfly. While the engine is running just block it off with your finger, and see if the idle stabilises. If it does you need to strip and clean/replace the thermostatic idle-up that bolts to the underside of the throttle body (the part that the two small water hoses connect to). Cheers... jondee86 |
|||
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Idle problems - filh - 02-21-2009, 10:57 PM
[] - jondee86 - 02-22-2009 10:30 AM
[] - The Doctor - 02-22-2009, 04:01 PM
[] - Sanity Clause - 02-22-2009, 07:55 PM
[] - Sanity Clause - 02-26-2009, 06:41 PM
[] - Sanity Clause - 02-28-2009, 02:26 PM
Suddenly, it all makes sense :) - jondee86 - 03-05-2009, 10:02 AM
Bouncing Idle - shawnho - 03-30-2009, 07:45 AM
Re: Bouncing Idle - jondee86 - 03-30-2009, 08:43 AM
Bouncing Idle Fixed - shawnho - 04-01-2009, 04:03 AM
Ghost in the machine :) - jondee86 - 09-17-2010, 12:03 AM
[] - irishtwincam - 01-13-2011, 12:49 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| No idle below 2000 rpm rich running | Steller Engineering | 3 | 3,518 |
11-30-2022 02:45 PM Last Post: RolanTHUNDER |
|
| Engine starts/revs but no idle | GenkiMotors | 17 | 13,504 |
11-20-2021 04:12 AM Last Post: GenkiMotors |
|
| Big wheel problems | gh0st | 16 | 14,607 |
11-15-2021 10:51 PM Last Post: gh0st |
|
| Starting problems 4-AGE kouki | Hanzo | 3 | 4,706 |
08-31-2021 06:20 PM Last Post: totta Crolla |
|
| exhaust odor/idle MOT issue | Ryo | 7 | 10,768 |
07-15-2019 09:17 AM Last Post: jondee86 |
|
User(s) browsing this thread: 1 Guest(s)



