highest lift and duration possible for stock ecu
|
02-06-2009, 08:04 PM
Post: #2
|
|||
|
|||
I'm running Cat Cams 9.5mm lift 268 degree with a stock ecu.
I would say these are just beyond what the ecu can handle, the engine will not tick over below 1000rpm Disconnecting the TVIS make quite a difference with these cams, TVIS seems to strangle the power. Power is definately up on stock but to get the most out of them would require a programmable ecu. Stock ecu rev limit is an issue with modified cams. no point in having power band that goes beyond 7700 rpm. 9.5mm lift is too much for stock shims, I'm using an under bucket type. An analogue brain in a digital World |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
highest lift and duration possible for stock ecu - chowdig - 02-06-2009, 02:59 AM
[] - totta Crolla - 02-06-2009 08:04 PM
[] - Eircamae86 - 02-07-2009, 03:40 PM
[] - oldeskewltoy - 02-09-2009, 10:13 PM
[] - oldeskewltoy - 02-19-2009, 02:31 AM
[] - oldeskewltoy - 02-19-2009, 06:35 PM
[] - dikolotour - 02-20-2009, 09:36 AM
[] - Super Marios - 02-20-2009, 10:57 AM
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Digital speedometer on stock dashboard | FanIsHere | 0 | 2,124 |
11-09-2022 01:36 PM Last Post: FanIsHere |
|
82mm Stock compression Pistons | apardal | 4 | 3,824 |
11-24-2021 04:26 PM Last Post: apardal |
|
20v Silvertop stock ignition timing and fueling maps | Lykowsky | 5 | 15,440 |
07-18-2019 03:52 PM Last Post: oldeskewltoy |
|
Most stock-resembling exhaust for the AE86? | DaLanZhu | 4 | 6,571 |
03-24-2019 04:10 PM Last Post: oldeskewltoy |
|
stock injector deadtime for 4age 20v silvertop/blacktop injector | ditn | 1 | 6,646 |
02-20-2016 11:48 AM Last Post: Bean |
User(s) browsing this thread: 1 Guest(s)