Threaded Mode | Linear Mode

**Jan Pedersen** · 01-19-2008, 06:03 PM

No I'll keep the old 16V for now. I just don't think I can have it all done before easter...

It doesn't look as bad as I thought it would, though:
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

I'm not totally sure the bearings are ok but they don't look too bad. I'll have someone check them out for me Smile

I hope I can get the head and valves off this weekend so I can get it cleaned next week. I don't have the proper tools at the moment...

**Jan Pedersen** · 01-22-2008, 10:22 PM

Head is off and the cylinders look ok:
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

All bearings are ok as well:
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

I'm going to have the head cleaned asap Thumbs up!

**Ivan141** · 01-22-2008, 10:31 PM

Must have been standing still for quite a while...plenty of rust on it (not too bad compared to the volvo engine I have been keeping in the garden for 2 years). The bearings and cilinders look alright, but you might consider new pistonrings and a hone while you've got it apart. The cilinder in that last picture looks like it has already polished the crosshatch pattern in one spot (not ideal).

**Jan Pedersen** · 02-24-2008, 10:10 PM

I removed most of the gunk:
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

Water routing "Mr. John style" Big Grin

**Ivan141** · 02-24-2008, 11:08 PM

Wow..youve done a good job cleaning that up!

rikard · 02-25-2008, 12:21 AM

Jan Pedersen Wrote:I removed most of the gunk:
[/img]

Looks good Thumbs up!

, will be doing the same thing soon, where did you get the heather outlet from?

Apolan · 02-25-2008, 02:40 AM

quite the transformation Thumbs up!

**Jan Pedersen** · 02-25-2008, 08:41 AM

Thanks guys! I simply put the head in a washer so I didn't even get my hands dirty Thumbs up!

rikard Wrote:
Jan Pedersen Wrote:I removed most of the gunk:
[/img]

Looks good , will be doing the same thing soon, where did you get the heather outlet from?

The outlet is from a RWD 16V - easy Cool

**Jan Pedersen** · 02-27-2008, 09:46 PM

I got my licens plates back today Thumbs up!

I had a short test drive with my new 6kg/mm coiloversprings and they where great! I had much less tendency to understeering and I had a lot of grip in the front end with the ncrcas Smile

And I ordered adjustable front dampers today - most of all to get a more comfy ride Confused

Yes I'm getting old I know it Banging head

I still have a few things to sort before going to the ring in four weeks, but I think I'll make it ok...

projectrollas · 02-28-2008, 02:44 AM

hey jan, did u drill a hole in the head to guide the water from left to right?

looking good.

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Ivan's coupe: bodywork is done	Ivan141	676	1,013,554	08-07-2024 08:46 AM Last Post: banpei
	(Catching up...) OST-082: Nope, never again... at least not without all the parts	oldeskewltoy	0	2,422	06-28-2022 09:17 PM Last Post: oldeskewltoy
	OST-066: I get all wavy (4AC content)	oldeskewltoy	10	20,122	04-03-2020 04:29 PM Last Post: Power_uP
	d3nso's little AE86 N2 build	d3nso	27	40,449	11-13-2017 11:42 AM Last Post: mad.matt
	Doc's KE20: - really coming together now	The Doctor	548	606,077	08-03-2011 11:57 AM Last Post: The Doctor