Threaded Mode | Linear Mode

Hatchback · 01-05-2007, 07:59 PM

Today i had some time for my hachi Wink

first i think about how to cut the old arches. Then paint a cutting line...

[Image: AEU86 AE86 - Hatchback's AE86:it goes on...]

first careful

[Image: AEU86 AE86 - Hatchback's AE86:it goes on...]

then with power Cool

get a little shock because of the rust..

[Image: AEU86 AE86 - Hatchback's AE86:it goes on...]

but dont be afraid, its the only way Smile

i will have to think about the inner arches...

[Image: AEU86 AE86 - Hatchback's AE86:it goes on...]

First try if it fits......and its ok. I painted the next cutting line, but it gets to cold in my small Garage.... Sad

Today i spend much money in good tool
[Image: AEU86 AE86 - Hatchback's AE86:it goes on...]

It can do holes, too. I will try to do everything for spend a long life for my 86 Wink

ZDoman · 01-05-2007, 08:52 PM

very nice job man!
I'm learning from you! Smile

I'd like to repair my car like you do.

Hatchback · 01-06-2007, 12:15 AM

If i'll spend my holiday at the Balaton, i can do it Wink

**banpei** · 01-07-2007, 01:58 PM

Hatchback Wrote:If i'll spend my holiday at the Balaton, i can do it

I'd rather have you spend your holiday at the Dutch coastline. > Smile

TOYOTA JOE · 01-07-2007, 03:20 PM

Schönes Auto wo du da hast Smile

Viel Spaß beim aufbauen Hurray!

ZDoman · 01-07-2007, 08:14 PM

Hatchback Wrote:If i'll spend my holiday at the Balaton, i can do it

I'll invite you if you help me Cool

Anyways there is a better place in Hungary than lake Balaton with better girls Wink

but its off here

Hatchback · 01-08-2007, 04:28 PM

*lol* so much holiday invites Smile

today i bought a welding machine and a big bottle of weld-gas.

Next weekend can come

Cool

Hatchback · 01-14-2007, 01:07 AM

Yesterday my welding machine arrived, so i'll decided to check it out Smile

Here i show his new place to him.....there you'll see, how small a garage can be :]

[Image: AEU86 AE86 - Hatchback's AE86:it goes on...]

the gas bottle is a little bit to big.... Big Grin

Here you'll see, what happens if you cut away the rust at the rear door.
[Image: AEU86 AE86 - Hatchback's AE86:it goes on...]

cutting the metalplate...
[Image: AEU86 AE86 - Hatchback's AE86:it goes on...]

and weld it. the weld points are not very nice, but strong. its only a cheap welding machine, but for the price it's very smart. :]
[Image: AEU86 AE86 - Hatchback's AE86:it goes on...]

finished. looks good, doesn't it? Big Grin

I was bored, so that i went in the garage again after dinner....
[Image: AEU86 AE86 - Hatchback's AE86:it goes on...]

cutting a piece of metal.......
[Image: AEU86 AE86 - Hatchback's AE86:it goes on...]

weld.......
[Image: AEU86 AE86 - Hatchback's AE86:it goes on...]

nearly finished......
[Image: AEU86 AE86 - Hatchback's AE86:it goes on...]

look from the outside to the no-more-rear-wiper hole Big Grin

but now its too late to work futher. my neighbours gonna kill me Smile

robokill · 01-14-2007, 04:51 AM

n1 done mate! did you weld before ?

Hatchback · 01-14-2007, 10:13 PM

thank you,
i weld in my old job, i was an car-mechanics, but my health doesn't allow me to work in my job. I had some knee operations, an now i can't stand a long time. And i'm only 27... Crying

Now i'm a car sellsman at an Toyota-dealer Smile

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Disjaukifa's AE86 Hatchback Project	disjaukifa	4	9,488	09-02-2015 09:02 PM Last Post: disjaukifa
	My 1985 Toyota Corolla GTS Hatchback Project (2002-Present)	ryceboy_124	4	24,004	08-05-2009 04:25 PM Last Post: Eric
	Levin hatchback from Croatia in progress	Kas	75	86,426	07-21-2006 12:47 AM Last Post: Kas
	Widar from Sweden - Kouki Levin Hatchback project	Widar	35	42,045	05-23-2005 12:17 AM Last Post: Widar