AE86 SR20DET - Walaki

[Lajoosh]

disassembling in progress

[Lajoosh]

fenders cut off, will be replaced with full panel frp wide fenders

[Lajoosh]

[DRFT]

Not a lot of red cars in a square meter?)))

[Lajoosh]

chassis repairs and seamwelding is in progress











also completely sandbalsted the rear axle and diff housing

then painted the diff housing in black

did some costumizations on the reat caliper brackets, removed the disc cover plate and welded the brake line mounts to it


some parts arrived from toyota for the reassembling...

[Lajoosh]

here is the rear axle housing with finshed strengthtening and with our new, lighter, second type weld-on traction brackets. also drilled some holes to lose some unnecessary unsprung weight
masked and is now ready to finish the sandblasting and powdercoating






filled the huge hole on the floor from my previous post

[Lajoosh]

after powdercoating the the axle housing i brought it to get a proper wash by steam. then started reassembling











do you guys also like how matte and glossy black alternate eachother?

[jasper]

NICE!! i did all this powderstuuf on my TE71,and after 5/6 years it is still good

it cost some money,but it cant beat a paint job

[[Walaki]D`Lair]

jasper Wrote:NICE!! i did all this powderstuuf on my TE71,and after 5/6 years it is still good

it cost some money,but it cant beat a paint job

Yea, its not cheap, but worth every penny!

[Lajoosh]